Sunrise Door and Home Software

KENO 16-Bit Documentation

Version 3.0
Author/Contact Al Lawrence/Sunrise Door Software
Overview The objective of Sunrise KENO is for you to match as many of the numbers the computer has picked at random. The computer will pick 20 numbers at random, between 1 and 75. You then get a chance to pick your 8 numbers, one at a time. All picks must be unique!

NOTE: Most errors will be logged to a file called DFRAME.ERR, which is created in the directory you run the door from.
- No Bulletins created
- Games per day limited to 2
- Keyboard timeout value limited to 2 minutes
- Makeup days disabled
- Game time limit disabled
- Can not send/receive messages to/from other players
Installation (1) Create a directory to hold all files
(2) Unzip the archive into the above directory
(3) Create a batch file or modify the batch file supplied. An example description of this file follows:

ECHO off
cd\PCB\DOORS\ACEY       Location of ACEY files
ACEY ACEY.CFG        filename and CFG filename (Name used in creating file in #3 above)

(4) When running in more than one node, be sure to supply a different configuration name for each node (your choice of name).

(5) If running with Fossil-based multi-port boards add /FD to the line containing the CFG name in the following example:


(6) Create a configuration file, with a name of your choice, or modify the supplied CFG file. A description follows:


# = Requires registration to change to a different value.

NOTE: There are NO Blank Lines in the Config File!!
** Location of system file (See Below)
Al Sysop's First name
Lawrence Sysop's Last name
Comm Port \     These 2 lines are required
       Node # /     ONLY for GTUSER.BBS
00000000 Registration Number
# 2 Keyboard timeout value in Minutes
! # 5 Maximum # of Games per day (MAX=99)
# 0 Max # of days a caller can make up, during calls in one day. 0=Disable Make-up Option
Maximum value = 27, Minimum value = 1
# N Automatic game reset at end of month:
Y = Yes enable auto reset
N = Keep accumulating scores
! # 0 Time Allowed in Door (Sysop = Time Remaining)
2 1 = DO NOT Display ADOPT-A-DOOR Message
2 = Display ADOPT-A-DOOR message
# NONE Drive:\Path\Filename to contain the Top Score Bulletin or enter NONE for NO Bulletin creation.
# NONE Drive:\Path\Filename to contain the Top Score Bulletin (Color) or enter NONE for NO Bulletin creation.
# NONE Drive:\Path\Filename to contain the Hall of Fame Bulletin or enter NONE for NO Bulletin creation.
# NONE Drive:\Path\Filename to contain the Hall of Fame Bulletin (Color) or enter NONE for NO Bulletin creation.
# Y Y = Allow Sysop to have 999 games
N = Do Not Allow Sysop 999 games
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
! # 000=00/00 Security Level/Games Allowed Per Day
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
@ # XXXX/YYYY Blackout Range From/To
000 Unique 3-digit number used as a suffix for the exported score file name, if you wish to participate in an Inter-BBS game. 000=no Inter-BBS participation.
N Y = Force Caller to respond to Instructions <y/n). May need this with Digiboards.
N = Allow caller to press ENTER in response to Instructions <y/N>
0 Use this option to LIMIT the number of HIGH SCORE entries to be displayed. A ZERO(0) = NO LIMIT
0 Number of months to keep in the SUNHOF files (Hall of Fame). 0 = ALL
N Y = Use Alias for Caller's name (Requires Door.Sys)
N = Use Logon Name for Caller's name
# Y Y = Allow Messages to be sent/received
N = Do NOT allow messages to be sent/read
Y Y = Log all callers to USAGEx
N = Do not log callers
G Door Rating. Default is G.
Maximum Characters: 5

** Replace with ONE of the following:

C:\bbs\PCBOARD.SYS         <- For PCBoard systems using PCBOARD.SYS only
C:\BBS\CALLINFO.BBS         <- For Wildcat! systems (prior to v3.0)
C:\BBS\DOOR.SYS              <- For ANY systems that support DOOR.SYS
C:\BBS\DORINFOx.DEF        <- For ANY systems that support DORINFOx.DEF
C:\BBS\SFDOORS.DAT        <- For Spitfire systems.
c:\bbs\TRIBBS.SYS             <- For TriBBS systems.
C:\BBS\GTUSER.BBS           <- For GT Power     * if using this option you must put the
                                                                         ComPort # on line 5 and the Node # on
                                                                         line 6 of the configuration file

! = See "Plays Per Day" Below
@ = See "Blackout Periods" Below

Maintenance None
Troubleshooting (1) If you are running this Door on a 486 system and encounter errors such as

ERROR 5.... ILLEGAL Function Call (may be associated with other problems)
KEYBOARD Timeout after 5 minutes

You may have to put the following line in your AUTOEXEC.BAT file:


(2) If you encounter an Error 62 (Input Past End of File), BEFORE you see the opening screen of the Door, your problem will more than likely be associated with the CFG file. The error 62 means that you do not have enough entries in the CFG. Compare your CFG file with the CFG definition in the DOC file.

(3) If you encounter an ERROR 70... Permission Denied, this will more than likely mean that you DO NOT have SHARE loaded. SHARE is a DOS file that comes with your version of DOS. To load it type the word SHARE at the DOS prompt. To load it permanently type the word SHARE on a line by itself in your AUTOEXEC.BAT file, any place prior to the loading of your BBS
software. There have been numerous reports that loading SHARE high causes some problems, so to be on the safe side, do not load it high.
Usage Log As an option, we provide you with the ability to log every player to a text file. IF you enter Y in the CFG file to log callers, the Door will place the caller's name as well as the ON and OFF times each time a caller selects the Door. A separate file will be created for each Node and the name of the file will be USAGEx, where x is the Node number.

You may delete these files at any time and the Door will recreate them the next time a caller enters the Door. If you do NOT want to continue logging callers, change the CFG file entry to N.
Make-Up-Days The Make-Up-Day feature allows the caller to make up any plays he/she missed during the current month and prior to the current call. You control whether to allow this option, as well as the number of days the caller can make up, on any particular days worth of calls. Entering a 0 (zero) for this option, in the
configuration file, turns the option OFF, any other value (up to a max of 27) turns the option ON and dictates the number of days the caller can make up.

NOTE: The number of games per day is calculated as follows...

Games Allowed per day x Number of makeup days.

Example: Games Allowed per day = 2
Max # of makeup days = 4

If a caller logs in on 5/8/01 and this is their first call of the month, they would have a potential of 16 games to makeup and bring them current (8 days (5/8/92) * 2 (games per day)). However, since the maximum # of Makeup Days is set at 4, the maximum # of games the caller can play on 5/8/92, is 8 (games allowed * max # of makeup days).
Hall Of Fame Bulletins The program will automatically reset the game when the first caller of the month plays the game. The score file will be cleared and a Hall of Fame file will be created. The file will be called SUNHOF.SCO. The files will be placed in the Door directory.

This file is written with WC @ codes and will display in color or black and white depending on the callers' setting.

WARNING: The HOF file is a cumulative file. That means it is read in each month and updated. DO NOT DELETE THE FILE!!!! or you will lose
the record of prior months winners!!!!
Blackout Periods Use the Blackout ranges option to define up to 5 time periods during which you DO NOT want the Door to be played. If a caller tries to access the Door during the Blackout period, they will be shown a message that contains ALL the Blackout periods you have defined, and to try the Door at a later time.

Each of the 5 Blackout ranges takes the form of XXXX/YYYY, where XXXX=beginning time and YYYY=the ending time. For example, 0930/1230 means to NOT allow the Door to be played between 9:30am and 12:30pm.

IMPORTANT: - All times must be 4 digits & must follow the XXXX/YYYY format - DO NOT change the XXXX/YYYY entry UNLESS you want to assign a Blackout range. - You MUST use the MILITARY time format. Example: 2030=8:30pm 0900=9am, 0030=12:30am, 1700=5pm, etc.
Plays Per Day/Door Time Plays Per Day and Door Time can be controlled several ways:

(1) You can use the Games Per Day, singular option, in the Configuration file above. This option, will affect ALL callers whose Security
Level is NOT defined in any of the 10 optional Security Level/Plays Per Day entries in the Configuration file.

(2) You can use the Door Time, singular option, in the Configuration file above. This option, will affect ALL callers whose Security Level is NOT defined in any of the 10 optional Security Level/Plays Per Day/Door Time entries in the Configuration file.

(3) You can restrict the number of games a specific Security Level will be allowed to play per day or REWARD specific Levels with
more Plays Per Day.

Likewise, you can restrict the Play time for a specific Security Level or REWARD specific Levels with more Door Time.

These options are handled by the use of the 10 Configuration entries (000=00/00).

The format of each entry is as follows:

XXX=YY/ZZ       where XXX is the Security Level (must be 3 digits)
                        where = is a constant and MUST be included
                        where YY is the # of games per day (must be 2 digits)
                        where / is a constant and MUST be included
                        where ZZ is num. minutes per Door entry (must be 2 digits)

If the callers Security Level is NOT defined, his/her Plays Per Day and Door Time will be controlled by the values in items (1) and (2) above, respectively.

You may define up to 10 Security Levels. All unused entries must be defined as      000=00/00
Example: Suppose you had 3 Security Levels defined on your BBS as (20=Subscriber, 30=Visiting Sysop, 40=CoSysop, 90=Friend) and you wanted to set Plays Per Day as :    Subscriber=5
                                                          Visiting Sysop=2

and Door Time as follows:         Subscriber=30 minutes
                                          Visiting Sysop=20 minutes
                                                 CoSysop=10 minutes
                                                    Friend=remaining call time

You would set the Individual "Games per Day" Configuration entry to 1 and the individual "Door Time" to 5 minutes (these would be the
default number of games and default Time for all Security Levels other than 20,30 or 40... make them any number you want). Next you would replace 4 of the Security Level entries as :   020=05/30
In the REGISTERED version of the Door, your players will be able to send messages back and forth to each other. All messages are PRIVATE and all messages are maintained within the Door itself and has no connection to the BBS' message bases. The Message file (PAIR3.MSG) will be restarted when the Door game restarts at the beginning of each month. If you do not restart your games on the first of each month then you must manually delete the MSG file. The file will continue to grow if not deleted and restarted.
InterBBS Option The Inter-BBS option is used when you are looking for a way to expand the competition beyond just running it on your BBS alone. With this option you can join with any number of other BBS' to create some very 'heated' scoring competition and exchange messages.

The Inter-BBS option has its own High Score file and when High Scores are displayed, on participating BBS', the name of the BBS on which the score was obtained will also be displayed. At the end of the month, the Inter-BBS scores will be reset automatically and a winner will be determined and displayed as part of the High Score display in the next month.

This option requires that the Door be registered.

The InterBBS files (EXE, HIS, DOC, etc) can be found in the included file called IBBSxx.ZIP (xx = version). Updates to this file will always be found on our WEB site.

The Inter-BBS option uses the 'HUB' and 'NODE' concept. The 'HUB' is the central/controlling BBS to whom all the other BBS' ('NODES') upload/transfer their score files. The 'HUB' then merges all score files and makes a merged file available for the 'NODES' to download/transfer.
Non-Standard COM
Support for COM 1-4 on the standard IRQ's - COM1/COM3 = IRQ4 and COM2/COM4 = IRQ3. If you wish to use a non-standard IRQ, add the IRQ number after the configuration filename. Let's assume your Door is called FOOBAR and you want to use COM1 and IRQ5. The command line passed to your Door would be:


The /5 tells FOOBAR to use IRQ5 rather than the standard IRQ4 that is normally used with COM1. No /x parameter is needed for the standard IRQ's.

As an alternative, you may use an environmental variable on the command line. To use the variable (following the example above), place a SET IRQ=5 in the batch file used to bring up your BBS (you would need a different IRQ number for each node). The command line would now look like this:


This, in combination with the use of the environmental variables described in the MULTI-NODE SETUP section will allow you to use one batch file and one Configuration file to run this door on all nodes.
Multi-Node Setup All Sunrise Doors are Multi-Node capable. Each node must have the ability to access a Configuration file which will have its own system file (DORINFOx.DEF, PCBOARD.SYS, DOOR.SYS, etc) defined on the first line. There are 2 ways to accomplish this:

(1) Create a separate configuration file for each node. The only difference between each file would be the location of the system
file for that particular node. For example, on my system there are 2 nodes and the first line of the Configuration files would look like this:


Thus, if you have a 4 node BBS, you will need 4 configuration files.

(2) Use ONE configuration file for ALL nodes. This Door will recognize the following PCBoard/Wildcat environmental variables:

PCBDIR (Directory containing the System file)
PCBDRIVE (Drive containing the System file)
WCNODEID (Active Node Number)

Thus, the first line of the SINGLE configuration file, for this Door would look like this:


NOTE: This option, as described, assumes that you are running PCB or Wildcat software. The environmental variables are automatically created by the software for each node.

HOWEVER, if you are running other BBS software you should be able to set the variables EXACTLY as described below, for EACH node (more than likely in each batch file you use to bring up EACH node):


Info with a carat (^) under it, MUST be typed as is. The rest depends on your naming conventions.

This, in combination with the use of the optional environmental variable described in the NON-STANDARD COM SUPPORT section, will allow you to use one batch file and one Configuration file to run this door on all nodes.
Adopt-A-Door The concept, ADOPT-A-DOOR, allows a caller to register (ADOPT) a door. It would be the same as sending in a donation, only this way it is earmarked for registering a particular door. In a way, the user feels he/she is "getting something in return". As a Door author I have decided to build this concept into each of my Door programs. The concept replaces the usual message "tell the Sysop to register this Door" we find in most

If the Door is unregistered then a message appears on the opening screen to that effect. After finishing or suspending a game, a message screen is displayed about the ADOPT-A-DOOR concept. The message also tells the caller to contact the Sysop to find out if there is any further details to the ADOPT-A-DOOR concept. Some Sysops give extra D/L time, online time, etc to callers that ADOPT-A-DOOR.

If the Door has been registered, either by the Sysop or other callers, the names of those contributors will be displayed in the closing screen.

NOTE: If you want to display the names of the callers that contributed to registering the Door, you must create an ASCII file called ADOPT.SYS. You create it with an ASCII text editor. Enter the names of the contributors (one on each line, maximum of 5 entries, each a maximum of 30 characters long). This file must be saved, in ASCII format, and placed in the Door directory.
Distribution You may make this file available for downloading from your BBS or you may upload it to any BBS or WEB site of your choice, provided that you do not make any changes to the contents of the archive (ZIP/EXE file). The archive and its individual contents may not be used by any service that charges any money whatsoever, without the written permission of the author.
Registration Registration and the subsequent insertion of the registration number into your configuration file, allows for the display of your BBS name on the opening and closing screen as well as the reduction of a delay built into the opening screen display along with the ability to change certain values in the configuration file.

Once a door is registered, any changes to registration information (Sysop name or BBS Name) will require the doors to be re-registered at the registration fee in effect at that time.

Be sure to use the proper upper/lower case when filling in your name and BBS name, as they MUST match the way you entered them in the configuration file.
Misc. The latest version this product, along with and other fine DOOR and HOME EDITION products are always available for download from this web site.

Moving Eye Line

Moving Eye Line

Last modified: March 28, 2018        Valid XHTML 1.0 Transitional